
S60SCPR Spartan Six Straight Round Ladder Polished Heated Towel Rail
The S60SCPR is part of our custom plated Heated Towel Rail range. This liquid-filled Heated Towel Rail can be plated in a range of custom finishes at your request. We offer a range of colours as standard which you can view here or you can request an additional custom colour outside of those offered. The warranty on the rail is 25 years for the rail and element, 5 years on the custom plated finish, and 5 years on the element. These rails are plated to order so please note there will be a 4-8 week lead time.
Heated Towel Rails are an affordable luxury for every bathroom for warming and drying your towels. The S60SCPR is a Liquid Filled Rail, this means the heated towel rail is filled with liquid and heated by an electric element. As the water particles increase in temperature they circulate in the rail thereby heating the entire rail. Liquid Filled rails run at a higher temperature than an equivalent electric heated towel rail.
The towel dryer is 600x790mm with six horizontal bars in a Polished Stainless Finish. The Heated Towel Rail comes as a prefilled unit meaning it is simply wired up like a standard towel rail on site. If the element was ever to fail it can be replaced without needing to replace the rail. The wiring position for the rail comes as standard on the right-hand side.
A Liquid Filled Heated Towel Rail will take closer to an hour to reach a maximum temperature of around 55 -60 degrees. The rail can be operated using an on/off switch however we recommend using a timer to allow you to set and forget and control your running costs
Output - 80Watts
IP Rating - IPX5
Warranty - 5 years
Lead Length - 1.4m
Voltage - 240V
No of Bars - 6
Wiring Type - Concealed (hardwired)
Wiring Position - Bottom right hand side
Distance Between Mounting Points (Top to Bottom) - 710mm
Distance Between Mounting Points (Left to Right) - 568mm
Finish - Polished Stainless Steel
PLEASE NOTE: Specifications are for information purposes only. Whilst every effort has been made to ensure the product specifications are accurate, due to continuing product development and improvement the specifications are subject to change. Specifications can be used to rough in and fit timber supports in the wall however we recommend no holes are drilled without having the product on site or verifying the details with the manufacturer. Thermogroup cannot be held liable or responsible for errors due to updated specifications.
Downloads
We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at apd@apadanadesign.com.au. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return questions at apd@apadanadesign.com.au.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, or damaged or if you received the wrong item so that we can evaluate the issue and make it right.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
We have put a lot of focus on ensuring the items get delivered to our customers as quickly as possible.
Delivery Time = Handling time + Transit time
All the products will be put through a production process, therefore there will be a handling time on them.
