SRB33M Brushed Round Ladder Heated Towel Rail
Heated Towel Rails are an affordable luxury for every bathroom for warming and drying your towels. The SRB33M Heated Towel Rail is a 750x700mm 8 bars rail ideally sized to fit one towel. The brushed stainless finish is very similar to a brushed nickel finish and can be used to compliment your brushed nickel tapware.
The SRB33M towel heater features multiflex wiring. This means that you have a connection point on the right or left-hand side of the rail, this would be typically at the bottom but the rail can be flipped so that it is at the top and provides the option of hardwired or plugin, all as standard out of the box.
The electric towel rail is designed to rapidly heat up and reach a temperature of around 45-55 degrees. The rail can be operated using an on/off switch however we recommend using a timer to allow you to set and forget and control your running costs. As the rail is electric it is very energy efficient and can cost as little as a $1 a week to run.
Output - 104 Watts
IP Rating - IP55
Warranty - 7 years
Lead Length - 1.8m
Voltage - 240 Volt
No of Bars - 8
Wiring Type - Multiflex – Concealed (hardwired) or Exposed (plug-in)
Wiring Position - Any of the four mounting positions
Finish - Brushed Stainless Steel
PLEASE NOTE: Specifications are for information purposes only. Whilst every effort has been made to ensure product specifications are accurate, due to ongoing product improvements the specifications are subject to change. Specifications can be used to rough in and fit timber supports in the wall; however, we recommend no holes are drilled without having the product on site or verifying details with the manufacturer. Thermogroup cannot be held liable for errors due to updated specifications.
Downloads
We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at apd@apadanadesign.com.au. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return questions at apd@apadanadesign.com.au.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, or damaged or if you received the wrong item so that we can evaluate the issue and make it right.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
We have put a lot of focus on ensuring the items get delivered to our customers as quickly as possible.
Delivery Time = Handling time + Transit time
All the products will be put through a production process, therefore there will be a handling time on them.
